INRAD DMS desk stand
The base is metal and weighs 2.5 pounds to keep it from sliding around or being knocked over easily on the desk.
Total weight of base and desk microphone, over 4 pounds!
Metal microphone body, standard 5/8 x 27 thread metal standpipe, rubberized microphone clip.
The circular rubber ring around the circumference of the metal standpipe for the mic clip is an internal shock mount for noise isolation.
Large push-to-talk switch on the base front.
To lock the PTT for those longer QSO's, slide the silver slider switch to the left while the PTT switch is down.
To release, slide back to the right.
On the back of the base, the 1/8" connector connects to the microphone body.
The 4 pin XLR connector is used for the detachable coiled DM-series cable that connects to your transceiver mic jack.
Own multiple transceiver models with different mic jack configurations?
It's as easy as unplugging the cable from the rear of the base and connecting the next cable.
Want a different on-air sound from a different INRAD microphone?
The M-series microphones on the base are also interchangeable.
To change from one mic to another, unplug the 3 pin XLR cable from the back of the mic and pull it off the clip. Plug in the new mic, put it on the stand.
It's that simple.
Alternatively, the M-series microphones can be purchased alone and used with either a stand or boom of your own or one of our small M605 table stands.
For use with the M605 table stand, M-series microphones are supplied with a 3 pin XLR to 1/8" mono male jack that is used with M-series adapters to plug into the front of the transceiver.
We also have foot and hand switches available that plug into the microphone adapter.
Microphone and cables sold separately.